
Case study · Manufacturing
Vinyl siding maker cuts material giveaway 42% across its extrusion lines
A building products maker's vinyl siding scrap ran above 25%, with gauge and additive use well above industry standards. USC and client teams prototyped Six Sigma and Lean fixes on one extrusion line, then rolled statistical process control (SPC) out to all lines.
Results
42%
reduction in overall giveaway
18%
reduction in ASA coating scrap
13%
reduction in PVC coating scrap
Scrap had exceeded 25% before the project.
The situation
Scrap in the siding division ran above 25%, and gauge thickness and the use of PVC and ASA color additives were well above industry standards. Together they were seriously eroding the division's profitability.
What the assessment found
- Process variation too high to cut giveaway safely
How the work was done
Prototype: one line first
Started on one extrusion line producing 15% of siding output, with four joint improvement teams working separate charters on cap stock, gauge, variation and scrap.
Variation: control the process
Used gage studies, 5S, attribute agreement analysis and statistical process control limits by product family, built from historical data.
42%
reduction in overall giveaway
Rollout: train every line
Trained operators, supervisors, engineers, inspectors and senior staff in SPC before deploying it to every production line.
“I was very familiar with USC Consulting Group based on work they had previously performed for me at another building products company so I knew I could count on them to get the job done.”
Lasting impact
Operators gained better control of the process, and SPC drove lasting reductions in variation and scrap across the siding lines.
Related case studies
Manufacturing
Control systems maker adds $1.5M annual revenue, cuts labor cost per job 51%
$1.5Mincrease in annual revenue
Read the case study →Manufacturing
Pulp and paper maker cuts bleach chemical costs $2M a year at one mill
$2Min annual bleach chemical savings at one mill
Read the case study →Manufacturing
PE firm's manufacturing holding cuts $6M a year and creates $36M in value
$6Min annualized cost savings
Read the case study →